Pizzato BN series control device units

BN-555x347 pizzatoBN-per-news
The range of Pizzato Elettrica industrial automation solutions is further expanded by the addition of the BN series control device units, a versatile modular product that adapts to any application requirement.

The main feature of the new BN series is easy installation, as the in-line holes make it simple to fit and wire the device: as it’s a plug-and-play device in fact, all you have to do is plug the connector in. Furthermore, in the case of a fault or damage, it can be replaced immediately thanks to the monolithic design of the control device unit, without the need for rewiring, avoiding any possible errors.

BN applicazione

The control device unit is designed with non-detachable, turnable modules that offer the user various installation options on-board the machine. After loosening the fixing screws, in fact, the upper and lower modules can be turned 90° to obtain the desired configuration.

The fixing screws are protected by push-in caps, which not only prevent dirt from accumulating, but they also block access to the screws and make it less likely someone will tamper with them.

The BN series control device unit is available in various configurations for various types of product applications: for standard applications, configurations with 3 or 4 devices are most suitable, while configurations with 6, 7 or 8 devices are available for more complex applications to provide the user with more control and signalling devices at the same location.

The control devices are recessed in the outer housing of the control device unit so they’re protected from accidental knocks, meaning longer operational life. They only protrude a little from the front, so the BN series remains within a max. width of just 40 mm.

In all the configurations, a variety of control devices can be installed, also illuminated by integrated LEDs.

The new Pizzato Elettrica BN series modular control device units have the same shape and dimensions as the RFID safety switches with lock of the NS series, giving machine manufacturers who already use these products the chance to create a visually uniform device and adopt an aesthetically pleasing solution.

Pizzato EROUND



The new control and signalling devices have protection degree IP67 allowing the installation of the products on any kind of application also in the hardest environmental conditions.
Almost all of the devices besides having protection degree IP67 have successfully passed the test for protection degree IP69K.A device, in order to comply with the protection degree IP69K (according to standard DIN 40050 part 9), has to pass an extremely severe test which simulates washing conditions in industrial environments with water jets having pressure between 80 and 100 bar, flow rate between 14 e 16 l/min. and temperature 80°C.The hot water jet, which has a sheet distribution, is directed to the object from a distance between 100 and 150 mm, with different angles (0, 30, 60 and 90°) and for 30 seconds in each position.In the meantime, the test product rotates around a vertical axis through a special rotating support.
Pizzato Elettrica EROUND products, strictly designed, manufactured and tested in Italy, prove to be suitable for use in machineries subjected to intense washing with high pressure and high temperature water jets and for any condition or environment where a particular attention for cleanness and hygiene is required.

EROUND (lift series)

EROUND (Control and Signalling Devices EROUND line)

Devices for lift applications according to EN 81-20 and EN 81-50

Control system for guards with lock system

EL AC-EL AN-EL AD Series Control Stations

Safety Handle P KUBE 2

Control system for guards with lock system